오늘 본 상품 (0)
    no
    show
    견적문의
    실시간견적
    기술자료실
    공지사항
    질문과 답변
    고객센터
    T.032-471-8801
    월 - 금 : 09:00 ~ 18:00
    점심 : 12:00 ~ 13:00
    토, 일, 공휴일 휴무
    고객센터 연결이 잘 되지않을시
    Q&A 게시판을 이용해주세요.

    오일 펌프 , 오일진공펌프, GLD-137CC ,ULVAC
    G-100G / GLD-136 대체품 → GLD-137CC
    판매가격 3,000,000원
    브랜드 ULVAC
    제조사 Japan
    제품코드 GLD-137CC
    추가옵션선택  
    주문수량
    상세설명 상품후기(0) 상품문의(0) 교환 및 반품/배송/결제
      Unit 50Hz 60Hz
    Actual Pumping Speed L/min 135 162
    Ultimate pressure Pa

    0.67(G.V. closed)
    6.7 (G.V. open)

    Motor   Single phase, 100V-120V/200-240V, 400W,
    4 poles, Multiple-range motor, Capacitor start & run
    Full load current A 6.8 (100-120V)
    3.5 (200-240V)
    5.8 (100-120V)
    2.9 (200-240V)
    Oil capacity mL 1,000
    Recommended oil   SMR-100
    Weight kg 29
    Inlet, outlet pipe diameter mm KF-25
    Ambient temperature °C 7 – 40
    Overall dimensions mm 170(W) x 487.5(L) x 249.5(H)

     

    GLD series features high performance, low vibration and noise and several functions such as gas ballast valve, oil-back-flow prevention mechanism, and large sized oil level gauge. This series equips multi-voltage motor and correspondent to international standard.

     
    Applications

    •
    Chemical, science experiment, Analyzer and Laser system.
    •
    Backing pumps for the electronic microscope.
    •
    Semiconductor equipments, sputtering equipments, vacuum evaporation equipments.
    •
    Vacuum dryer, freeze dryer

     

    1. Oil is deteriorated with operating, and becomes the factor of performance shortage.
    A decrease and the dirt of oil are confirmed, and please regularly add and replace it.
    2. A backflow preventer is incorporated into the pump to prevent the oil from flowing back while the pump is stopped.
    Please make a suction side into atmospheric pressure when the pump is stopped for a long time.
    3. If operation is performed at high pressure, oil mist is generated at the exhaust side.
    4. It is not suitable for the pump if operation is performed continuously at a high evacuation pressure of 10kPa or more.
    5. There is a risk of explosion. Never block the outlet or operate the pump with equipment mounted at the outlet side that blocks the passage of gas.
    Otherwise, the internal pump pressure increases causing the pump to explode, the oil level gauge to protrude or the motor to be overloaded.
    6. This motor houses an automatic returning thermal protector, which may be activated in case of trouble.
    The motor will restart automatically when the temperature goes down.
    If the thermal protector is activated, switch off the power immediately for safety reason.

    상품정보고시
    제품명 오일 펌프 , 오일진공펌프, GLD-137CC ,ULVAC
    판매가격 3,000,000원
    브랜드 ULVAC
    제조사 Japan
    관련상품
        
    상세설명 상품후기(0) 상품문의(0) 교환 및 반품/배송/결제
    번호 제목 이름 별점 날짜
    아직 작성된 상품평이 없습니다.
     
    상세설명 상품후기(0) 상품문의(0) 교환 및 반품/배송/결제
    번호 제목 이름 날짜
    작성된 상품문의가 없습니다.
      상품문의하기
    상세설명 상품후기(0) 상품문의(0) 교환 및 반품/배송/결제
    반품교환
    구입제품의 이상이 있을 경우
    - 구입후 7일 이내에 동일제품으로 교환 가능하며 운송비는 판매자 부담입니다.
    - 다른 제품으로 교환, 또는 이상이 없는 제품과 함께 교환을 원하실 경우 구매자께서 운송비를 부담합니다.

    구입제품의 이상이 있을 경우 (색상,사이즈,다른상품교환)
    - 구입후 7일이내 교환 가능하며 구매자께서 운송비를 부담합니다.

    !! 주의사항
    비닐포장 및 Tag의 폐기 또는 훼손 등으로 상품 가치가 멸실된 경우에는 제한.
    반품시에 해당 사은품이 있을 경우 같이 보내주셔야 합니다.
    배송안내
    결제후 3~7일 이내에 상품을 받아 보실 수 있습니다.
    국내 최대의 물류사 롯데택배를 통하여 신속하고 안전하게 배송됩니다.
    모든 제품은 착불 발송됩니다. 단 30만원 이상 구입시 택배무료배송입니다.
    (제주도를 포함한 도서,산간지역은 항공료 또는 도선료가 추가됩니다.)

    화물(용달),퀵 이용은 구매자께서 운송비를 부담합니다.

    결제안내
    결제방법은 신용카드, 국민/BC(ISP), 무통장입금, 적립금이 있습니다.
    정상적이지 못한 결제로 인한 주문으로 판단될 때는 임의로 배송이 보류되거나,주문이 취소될 수 있습니다.
    상호 : (주)에이치와이산업     주소 : 인천광역시 계양구 주부토로413번길32     대표자 : 윤다은, 허종순     사업자등록번호 : 121-86-02196 (정보확인)
    통신판매업신고 : 제2015-인천계양-0634호     부가통신사업자번호 : 121-86-02196     개인정보관리책임자 : 김희정     개인정보보호기간 : 회원탈퇴시
    호스팅서비스제공업체 :